Last updated

How to Make a Homemade StrapOn?

Homemade strap-on.

There is always a need for a harness. If you love sex toys as much as we do, then you might see that you need more strap-ons than you thought. Though it is more recommended to buy a strap-on because they are more durable, stronger, reliable, and just overall better. However, if you are in a situation of emergency, then a homemade strap-on isn’t such a bad idea - since it is for one-time use. Today, we’ll see how to make a DIY strap-on using different materials you can find around you.

What You Need to Make a DIY StrapOn

Look around you for either of the following things you can creatively transform into a DIY strapon in minutes.

  • Your underwear: look for thick and high-quality materials like cotton, natural latex, nylon, Lycra, or spandex.
  • An old or unused bedsheet.
  • Ropes made from gentle and skin-forgiving materials.
  • Long scarves.
  • Straps used for bondage ropes or BDSM.

Tips for How to Make a Homemade Strap On?

Finally, here, grab your construction hats because you will go into 5 minutes craft right now. Make sure to try it out as you are reading this. Not only will it be fun, but it will also help you remember when you do need it.

However, note that if you want to know how to make a strap-on, you need to first decide what kind of strap-on you need. Some materials are too light or not thick enough to make some kinds of harnesses. But don’t worry, we will make sure to indicate where you can and cannot use some materials.

How to Make a Simple StrapOn?

To make simple DIY strap-ons, you can use your underwear, your old bedsheet, and soft-material scarves. This design is without complexity, fasteners, buckles, or knots. Do you know of the harnesses with in-built O-rings? That’s what we are about to make here. To do this:

  1. Get a new pair of thick underwear made from thick and high-quality materials like cotton, natural latex, nylon, Lycra, or spandex. Old underwear doesn’t last long because its durability has already been messed with. The underwear should also be tightly fitted (not too tight though).
  2. Put it on and use a marker to mark an ‘X’ on where the dildo should rest.
  3. Remove the undergarment and use sharp scissors to cut the X. Don’t cut out a circular hole so that your DIY harness can fit into different dildo sizes.
  4. Attach the O-ring onto the undergarment using small pins. Make sure you wear the underwear throughout the day to see if the pins won’t prick you.

How to Make the Two-Strap Style?

Ropes, scarves, unused cut bedsheets, and straps make the best instrument here. The two-strap harness has one strap around the waist and another in between the legs with the dildo in the middle. The original one usually has buckles and fastenings. They are also usually firmer than the DIY ones. To create a two-strap homemade strapon, follow the steps below:

  1. Tie the rope, scarf, or strap on your waist below your belly button.
  2. Mark out where the dildo will rest (usually at the middle of the strap under your belly button).
  3. Remove the scarf, rope, or strap and tie a knot at the point you marked.
  4. Put on the newly created DIY strap-on and slide in the dildo through the knot.
  5. Run another scarf, rope, or strap between your legs and tie it to the first strap in the back and front. This second addition helps keep the first rope from dancing around during intercourse.

How to Make the Three-Strap Style

This is more complicated than the first and second harness types. The best material here is a soft rope or straps used for BDSM or bondage play. You can easily get one from a sex toy store or any local store. You might also need to get some thread and needles because you would need to sew some parts together.

  1. Measure your waist and inner thighs.
  2. Cut the ropes into three sections using the measurements you have taken; one long section and two shorter (twin) sections. The long section will go round your waist and the shorter ones will go round your thighs.
  3. Use a candle or lighter to sear the ends of the cut ropes to avoid fraying.
  4. Sew the ends of the two thigh straps to the strap for the waist.
  5. Attach an O-ring to the point where the two thigh straps and the waist strap meet (again, sew it in).

Conclusion

You will always need a harness either to hold a dildo, during BDSM or to hold body parts in place. So, when you are stuck in a situation where you cannot buy one, you can use the tips and guidelines we have mentioned in this article to make your unique strap-on. However, immediately you can, make sure to buy a quality strap-on from a reputable source. We can help with this - We have tons of reviews on the best sex toys so you can check through them to find the strap-on that fits your budget and taste.

Tags: best sex toys, average number times per week married couples make love, how to have a successful open relationship, big booty love doll, sexual confidence, best review penis pump, clit sucker toy, best lube for fisting on the market, best fleshlight girls, large penis sex

Leave a Comment
Your email address will not be published. Required fields are marked *